 |
Warning: This post-curing apparatus uses light sources of high-energy UV rays that can cause serious harm to the eyes and skin. Avoid direct or indirect exposure to such emissions even for short periods of time. |
 |
Warning: Avoid opening the curing compartment lid during operation. If you need to open the lid during a post-curing cycle, pause or stop the program before opening. |
 |
Warning: High voltage electricity is accessible in the vicinity of this sign or behind the access panel. High voltage can cause severe burns or death, as well as fire. Access panels are for service only and should be opened only by certified service personnel or trained maintenance personnel. |
 |
Warning: The UVCA 3000 utilizes the heat generated by the lamps to accelerate the curing process of the resins. The cured models and the oven itself may be very hot. |
 |
Warning: During post-curing, the models can generate heat, especially if grouped in large quantities. Never leave the UVCA 3000 unattended to avoid the risk of fire. |
 |
Warning: The materials cured in the UVCA 3000 could generate fumes that are harmful to health. Position and use the UVCA 3000 in a well-ventilated place. |
 |
Warning: Place the UVCA 3000 away from heat sources, flammable materials, and liquids that may cause a safety risk. Clean the unit only with a clean, dry cloth. Do not expose to water. |
 |
Warning: Possibility of loss of data or damage to equipment. |
 |
Warning: Wear gloves when handling materials or touching surfaces that may contain the materials. |
 |
Warning: Risk of chemical exposure. Wear personal protective equipment (PPE) when replacing bulbs. A broken bulb may result in exposure to phosphor powder dust and to elemental mercury vapor. The phosphor contains thallium, which can be absorbed through the skin or inhaled.
|
 |
Warning: Risk of electric shock. Do not replace the bulbs while the UVCA 3000 is connected to a power source |