Safety Procedures & Protocols UVCA 3000

Indicates a hazardous situation that, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury.

Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

NOTICE

Indicates important information or a situation that, if not avoided, could result in equipment or property damage.

Lifting hazard: Indicates possibility of strain or other injury when lifting heavy objects.

Electrical hazard: Indicates risk of electrical shock which can cause serious injury or death.

Safety ground (PE)

Hot surface: Indicates risk of burns due to heated areas or surfaces. Avoid areas marked with this label.

General warning sign

UV Radiation

Flammable material

Respiratory hazard

Environmental hazard

Toxicity hazard

WARNING

Risk of electric shock: Hazardous voltage electricity is accessible behind the access panel. Electrical energy can cause severe burns or death, as well as fire. Access panels are for service only and should be opened only by certified service personnel or trained maintenance personnel.

WARNING

Risk of electric shock or fire: Do not operate the equipment if the housing, power cables, or any components are damaged.

WARNING

Risk of chemical exposure:Wear personal protective equipment (PPE) when replacing bulbs. A broken bulb may result in exposure to phosphor powder dust and to elemental mercury vapor. The phosphor contains thallium, which can be absorbed through the skin or inhaled.

WARNING

Risk of electric shock: Do not replace the bulbs while the Curing Unit is connected to a power source.

WARNING

Multiple electrical and health hazards: Always replace the light bulbs with 36W type specified by EnvisionTEC.

WARNING

Multiple mechanical and electrical hazards: Do not make modifications to the equipment or attempt to circumvent any protective devices. Use of the equipment in a manner not specified by EnvisionTEC may result in injury or damage to the product. Observe all hazard warning signs during operation and service.

WARNING

Fire hazard: Do not place any flammable materials inside the Curing Unit. Parts must be dried before processing to avoid creation of flammable vapors.

CAUTION

Risk exposure to UV light: The UVCA 3000 curing unit uses light sources of high-energy UV rays that can cause serious harm to the eyes and skin. Do not bypass the door interlock. During servicing, avoid direct or indirect exposure to such emissions even for short periods of time.

CAUTION

Risk exposure to hot surface:The UVCA 3000 utilizes the heat generated by the lamps to accelerate the curing process of the resins. Allow parts to cool down before touching. Use gloves as the cured models and curing unit may be very hot.

CAUTION

Health risk: Wear safety googles when working with uncured parts. Check resin SDS for compatibility with use of contact lenses.

CAUTION

Respiratory hazard: The materials cured in the UVCA 3000 could generate fumes that are harmful to health. Position and use the Curing Unitin a well-ventilated place. Avoid breathing vapors.

CAUTION

Risk of chemical exposure: Wear gloves when handling uncured materials or touching surfaces that may contain the resin. Refer to material SDS for choice of gloves.

NOTICE

Place the Curing Unit away from heat sources, flammable materials, and liquids that may cause a safety risk. Clean the unit only with a clean, dry cloth. Do not expose to water.