Software Update
Select Settings > Printer Settings > Software Update on the printer screen to check the software version installed on the printer.
If the latest version of the software is installed on the printer, the ChangeLog button displays. Select it to view detailed information about the current version.
If a new version of the software is available, the Update button displays.
Important: Do not turn the printer off during the update!
1. Select Update.
2. Press Start.
→ The update process starts.
→ The following screen appears.
3. To apply changes, manually reboot the printer by pressing Reboot. Otherwise, it will auto-reboot in 30 seconds.
Custom Software Update
In some cases, you can order a custom version of the Control Software that contains special features or an early bug fix. Once that custom Control Software version is ready, you will receive an encrypted version number required to install the custom software update on the printer.
1. Go to Settings > Printer Settings > Software Update and press Change Version.
→ The following screen appears.
Notice: The Apply button is grayed out if no custom updates have been installed yet.
2. Press Add Version.
→ The following screen appears.
3. Type in the encrypted version number.
4. Select the needed version from the list and confirm with Apply.
Tip: You can recover to the previous software version at any time.
→ The system saves the previously installed Control Software version.
→ The following screen appears.
5. Press Start.
→ The Experience Improvement message appears asking if you allow the data collection to improve the experience with our products.
6. Press OK to allow data collection.
→ The process of printer updating starts.
→ After a successful printer update, the following screen appears.
7. To apply changes, manually reboot the printer by pressing Reboot. Otherwise, it will auto-reboot in 30 seconds.