When a print job is successfully completed, the build platform will rise to the top of the Z-axis tower. The build platform with the printed part is ready to remove. Have a paper towel ready to catch potential drips of uncured material.
To remove the build platform with printer models:
1. To open the hood, pull the hood lock on the rear side and then lift the hood upwards.
2. Place one hand on the build platform handle. Loosen the build platform torque knob with the other hand.
3. Lightly cradle the bottom of the build platform with the paper towel. This will help to prevent dripping while removing the build platform from the printer.
4. Pull the build platform towards yourself until it comes free from the printer.