|
NOTICE |
Make sure the build platform is clean and the material tray is in place and has material in it before starting a print. Failure to do so will result in failed builds and damage to the equipment. |
Notice: Before starting a print, the software checks if the buildstyle in the job file matches the material tag on the printer. If they do not match, then the print job will not start.
Notice: To pause a job, use the Pause Job button. All other methods will likely result in a failed build. Proceed with attention.
1. From the Home screen, select Job List:
2. Select the job folder from the Job List.
3. Press the Play button to start the job.
→ The system checks if the printer is ready to start a print.
→ The following window appears.
4. To start the job now, wait until the job starts.
To delay your job print, press Start Later.
Notice: The minimum delay time is 15 minutes. The maximum delay time is 999 hours 45 minutes.
→ The following window appears.
5. Set the required delay time using the plus and minus icons in the Hours and Minutes fields and press Apply.
→ The print initialization window appears.
6. Wait until the job starts.
→ The build platform homes.
→ The job starts.