Articles in this section

Install Build Platform Pro XL
For Internal and VAR/Sales Partner Use Only - Do Not Share
Internal Use Only - Do Not Share

Avatar
Knowledge Base Team
  • Updated
Follow Print

Description

The build platform is an assembly comprised of:

  • A large, flat platform
  • A handle
  • A connection cavity

Cured material adheres to the flat area of the build platform during the printing process. 

Installation Steps

  1. To open the hood, pull the hood lock on the rear side and then lift the hood upwards.  

20220406_Einstein_Pro_XL-Open_hood-low-_no_platform_no_material_trayx500.png

  1. Turn the build platform knob on the top of the printer a couple of times to loosen it.

20220408-Einstein_Pro_XL-Loosen_the_build_platform_torque_knobx500.png

 

  1. Slide the build platform into the build platform housing at the top of the Z-axis tower.

20220408-Einstein_Pro_XL_-_Slide_the_build_platformx500.png

 

  1. Turn the build platform knob to tighten and secure the build platform in place.

20220408-Einstein_Pro_XL_-_Tighten_the_build_platform_torque_knobx500.png

 

Important: Securely tighten the build platform before printing. Failure to do so will cause the build platform to be uneven and can cause build failures.

Related articles