If the printer was ordered with any accessories, such as the Otoflash, PCA 4000 curing apparatus, PWA 2000 parts washer, material, or extra material trays, these items will be sent separately.
Keep the curing apparatus box, the parts washer box, and the spare material tray box.
Important: The crate weighs 29 kg (63 pounds) and may require a dolly to move.
To store the crate:
- Reinsert the padding and include the padding from the accompanying boxes.
- Break down any additional boxes, fold them, and insert them into the crate.
- Re-seal the crate using the original brackets.
- Place it in storage with the "Please do not discard, this crate accompanies 3D printer" sign attached to the sides.
Accessories boxes containing the Otoflash, PCA 4000 curing apparatus, and PWA 2000 parts washer are shipped separately if purchased.
To store them:
- Remove the padding and place it into the crate alongside the printer padding.
- Cut the tape, flatten the cardboard, and set it near the crate for safekeeping.
Tip: Depending on the curing unit purchased, its box may fit inside the crate.