External Hardware, Starter Kit, and Accessories Pro XL

The material tray consists of two plastic frames with a special membrane called Pre-Stretched Assembly (PSA) between them, which fits snuggly over a piece of glass. Between the glass and the membrane, there is a separation film that prevents PSA from sticking to the glass.

As the build platform moves up taking the exposed part away from the PSA, it pulls the membrane up finally releasing it and allowing the parts to separate. The build platform then moves back down and the next image in the sequence is projected; the cycle repeats itself.

The build platform is an assembly comprised of:

• A large, flat platform
• A handle
• A connection cavity

The flat area of the build platform is where cured material will adhere during the printing process. 

This cable connects the printer to the local network. The cable inserts into the I/O panel behind the printer. The other end plugs into the network. The printer can be operated by other Windows computers on the network if the CAT 6 is plugged into a modem or into a network outlet.

This cable connects the printer to the operating computer, as needed. The cable inserts into the I/O panel behind the printer. The other end plugs into the operating computer.

Use the scraper to remove printed models from the build platform. Use the paint scraper for detaching larger printed models. You can also use the scraper to remove material residues from the build platform. 

Required to gently mix material in the material tray before each print.

The USB is a back-up for transferring print information from the operating computer to the printer. Between 8 and 32 GB size is recommended.

Required for printer calibration and to assist with technical support cases. It is not required for day-to-day operation. 

Required for light calibration and to assist with technical support cases. They are not required for day-to-day operation.

Required for light calibration and to assist with technical support cases. It is not required for day-to-day operation.

The Parts Washing Apparatus is a convenient tool to assist in cleaning any uncured resin from 3D printed models.  The convenient removable basket allows for ease of use when dipping or extracting objects from the tank.

Desktop Orbital Shaker is also an option for cleaning the printed parts. 
ETEC recommends the ELMI S-3.02 20L Analog Orbital Shaker 20mm Amplitude with Large Platform.

The Otoflash is the recommended curing unit for the models printed with the P3K 2.0 printer using medical printing materials. To get more information on setting up the Otoflash, check the Setup Otoflash page. To operate the Otoflash, check the Hardware Operations Otoflash page.

The PCA 4000 Parts Curing Apparatus is the recommended curing unit for the models printed with P4K 2.0 using non-medical printing materials. To get more information on setting up the Otoflash, check the Setup PCA 4000 page. To operate the Otoflash, check the Hardware Operations PCA 4000 page.