The recommended washing units for Xtreme 8K are the following:
- Orbital Shaker
- Ultrasonic Cleaner
Select one of the preferred options for printed parts washing.
Orbital Shaker
This washing solution for large parts has:
• RPM upper limit greater than or equal to 200.
• Amplitude greater than or equal to 20 mm.
• Platform size of at least 300 x 200 mm.
A plastic container needs to be purchased separately.
Your container size will determine the maximum allowable part size.
Tip: The ELMI S-3.02 20L Analog Orbital Shaker 20mm Amplitude with Large Platform is recommended. See manufacturer for setup instructions.
Ultrasonic Cleaner
Another option for washing large parts is the Ultrasonic Cleaner with the following characteristics:
- Frequency between 37-40 kHz.
- Power/volume greater than or equal to 18W/L.
- Tank size greater than or equal to 327 x 300 x 200 mm.
The tank size determines the maximum allowable part size.
Tip: The ELMA Ultrasonic Cleaner: 4.7 gal Tank Capacity, 11 51/64 in Tank Dp, 7 7/8 in Tank Ht is recommended. See manufacturer for setup instructions.