Temperature controllers heat the chamber, blade, and material tank inside the printer. Once the Xtreme 8K CS is started, the system initiates heating the chamber, blade, and material tank to the predefined temperatures.
Information about the temperature changes is displayed on the status bar at the top of the window and in the Printer Monitoring menu.
When the print job starts, the system detects the required temperatures for the chamber, blade, and material tank and heats the components to the minimum required temperatures indicated in the job file. There is an option to abort the job during the printing process.
When the minimum required temperature is established, the printing begins. The printer continues to maintain the target temperature during the print job.
If the chamber, blade, and material tank do not reach the required temperature then the job will not start.