Set Up PWA 2000
For Internal and VAR/Sales Partner Use Only - Do Not Share
Internal Use Only - Do Not Share

To set up PWA 2000:

1. Situate the PWA 2000 on a secure surface at a distance of at least 8 inches (20 cm) from any other object.
2. Connect the power cable to the PWA 2000 and into a power socket with a grounding socket. A controlled switch socket is preferred as this would allow the operator to easily disconnect the power to the apparatus when not in use.
3. Once power is connected, the PWA 2000 will display a brief startup screen and will then go to standby mode. In this mode, the PWA 2000 is ready to start the required program.