Take the quality of your print jobs to the next level with a job counter that allows for constant control over the material tray condition!
It is not a secret that material trays are consumables with a predefined expiration date. Even when a material tray is maintained properly in accordance with the provided instructions and recommendations, it cannot be used forever. How would you know when a material tray should be replaced? Here the Job Counter feature comes in handy!

What is the Job Counter?
To find the list of material trays with job counters, navigate to:
- Settings | Move & Calibration | Material Tray in D4K Control Software
- Settings | Move & Calibration | Material Tray in E1 Control Software
The number on the right to the material tray name is the job counter.
When should the material tray be replaced?
Click on the selected material tray name to see the details regarding the print jobs.
Depending on the Job Counter value, the number will be highlighted in color depending on the condition of the material tray.
Envision One cDLM | D4K Pro | |
Green |
< 200 prints |
< 100 prints |
Keep using this material tray. |
||
Yellow |
200-299 prints Keep using this material tray but consider replacing it later after 250 prints. |
100-199 prints Keep using this material tray but consider replacing it later after 150 prints. |
Red |
>300 prints |
>200 prints |
Replace the material tray at the nearest convenience. |
How to Delete the Material Tray from the List?
Once the material tray is no longer needed, follow the steps below to delete it:
- Click on the material tray name.
- Tap Delete to remove the material tray from the list.