Autopilot is the quickest and easiest way to prepare your models for printing. In just a couple of clicks, the system automatically prepares your model(s) for printing, places them on the platform, and generates the supports if needed.
The Autopilot tool contains 3 applications: Models, Dentures, and Night Guards. Each of these applications has several printing modes available.
Models | Dentures | Night Guards |
Basic | Denture bases | Night Guards |
Dental models | Monolithic full dentures | |
A-Type jaws | Artificial teeth |
1. Open your 3D model(s). 2. Click the 3. Select the needed application from the Application drop-down list. Important: A special license is required to activate Dentures and Night Guards applications within the Autopilot tool. 4. Click Apply. → The list of the available modes under the Models application appears. |
![]() |
5. Select a print mode depending on the model(s).
Notice: The availability of modes in the Dentures and Night Guards applications depends on the selected material. The modes that match the current printing material will be available, while others would be grayed out.
6. Click Apply. → The parts are automatically placed according to the selected mode algorithms. → The supports are either generated or deleted depending on the selected mode. → A dialog box appears. 7. Select a printer in the Printer If necessary. 8. Click Send job to the printer. → The job is sent to the selected printer. |
![]() |
Notice: Autopilot automatically applies to all the models on the platform. If you have several models that need to be prepared for print individually, prepare your print step by step using the tools described in Using Envision One RP.