Envision One RP supports files of the following formats: : *.stl, *.3mf, *.cli, and *.slc.
There are several ways to open a file:
- Go to Menu > Open and select your model.
- Drag and drop a model directly into the open Envision One RP software.
- Press the + sign and select your model.
- Press <Ctrl>+<O> and select your model.
Important: All models need to be within the limits of the printable space. Models running off the edge of the white space in the Envision One RP software will be cut off and will not print. Any model added to the grey space in the software will not print at all.
Open .slc Files
Before loading a sliced file, select the buildstyle file with the same layer thickness as in the sliced file. If the layer thickness of one or more sliced files differs from the one in the buidstyle file, Envision One RP will notify you.
Open .3mf Files
When opening the .3mf files, the models together with the previously selected supports are loaded. Proceed with the already existing supports for the model or create new ones, see Add Supports Manually.