To start printing, you should create and configure your new project.
1. Open Envision One RP.
2. Go to Menu > New.
→ The following window opens.
3. Select a printer you are going to print with.
4. Select the required material and set the layer thickness.
Notice: The buildstyles are filtered according to the selected printer, material, and layer thickness.
See the Install Buildstyle page for more details.
5. Press Create.
→ A new project has been created.
The platform is actually the printable space. It is represented by the white grid on the screen. This space is measured by X, Y, and Z range.
By default, Envision One RP shows the platform from the Top view when it opens. The lower-left corner of the screen will display the word Top if you are in Top view.
Now you can add your models to the platform.