Start Print Job
1. On the Home screen, select the Job List.
2. Select the job folder from the Job List.
3. Press the blue Play button to begin printing.
4. To select a different material tray, select Change.
If you don't need to use a different material tray, press Next.
5. Check the requirements and press Start.
6. Wait several seconds to print right away or press Start Later to delay the start of the job.
7. Set the required delay time using the + (plus) and – (minus) icons and confirm with the Apply button.
→ The print job starts.
Stop Print Job
To stop the print job, the following options are available:
- Pause Print Job
- Abort Print Job
Pause Print Job
1. Press the button in the job printing window.
→ The following window appears.
2. In the confirmation window, select Yes.
→ The job pauses.
3. To resume a print job, press the blue Play button in the job printing window.
Abort Print Job
1. Press the button in the job printing window.
→ The following window appears.
2. In the confirmation window, select Yes.
→ The job is aborted.
→ The following window appears.
Tip: If there is no need to simplify the process of cleaning the material tray, select Cancel.
3. To simplify the debris removal process from the material tray, select Yes.
→ The whole material tray area is exposed.
4. Remove debris from the material tray by removing the thin film of exposed material and following the procedure for filtering the material, see Maintain Material.
→ The following window appears.
5. To submit a support request, press Yes and follow the steps in the Request Support article.
Delete Print Job
1. Select Job List on the main screen.
2. Select the job you want to delete from the list of jobs.
Tip: You can delete multiple job folders at once by selecting them using the checkboxes.
3. Press the white Waste Bin icon on the top-right corner to delete the selected job file(s).
→ The following confirmation window appears.
4. Press OK to confirm.