To add a new material tray to the list of material trays:
1. Go to Settings > Move & Calibration > Material Tray.
→ The list of material trays appears. A green checkmark shows the currently selected material tray.
2. Press Add New Material Tray.
- For the material tray with serial number, select With S/N.
- For the material tray without a serial number, select Without S/N.
3. Find the serial number on the front part of the material tray and type it into the field on the screen that appears. If your material tray does not have a serial number, think of its name and type (7 characters using only digits from 0 to 9) and type it into the corresponding field.
4. Press OK.
→ The material tray is added to the list.