Save Job on USB Drive
1. Connect the USB drive to the PC with the installed Envision One RP.
2. Open Envision One RP.
3. Create a job you want to save.
4. Select a job you want to save.
5. Press Print.
→ The following window appears.
6. Press Save job.
→ The folder selection dialog box appears.
7. Open the USB drive folder you want to save a job to and press Select Folder.
→ The job folder with all the required data is saved to the selected USB drive.
→ The following window appears.
8. Click Continue to exit the Save Job dialog box or Open Folder to open the Job folder.
Load Job from USB Drive
1. Upload the required job to the USB drive.
2. Insert the USB drive with the uploaded job into the corresponding plug of the printer.
→ The job is automatically added to the Job List of D4K Pro.