What Is Build Platform?
The build platform is an assembly comprised of:
- A large, flat platform
- Two handles
The flat area of the build platform is where cured material will adhere during the printing process.
Install D4K Pro Build Platform
To attach the build platform:
1. Open the protection door.
2. Slide the build platform onto the receptor held on the Z slide.
3. Tighten down the build platform clamp to secure the build platform.
4. Check that the build platform is secured in position.
Tip: Make sure the build platform is tightened down securely before building. Failure to do so will cause the build platform to be uneven and can cause build failures.