Oxygen Concentrator |
The oxygen concentrator creates a flow of oxygen into the printer via an internal series of tubes to the domeless material tray. It is delivered preset to the correct pressure. |
 |
PCA 2000 Curing Apparatus |
The Parts Curing Apparatus is used for post-curing the printed models. It utilizes a unique system of UV LED light sources that use both 385nm to deep cure and 405nm for the perfect surface cure of each part. For more information, check the Curing Models page. |
 |
PWA 2000 Parts Washing Apparatus |
The Parts Washing Apparatus is a convenient tool to assist in cleaning any uncured resin from 3D printed models. The convenient removable basket allows for ease of use when dipping or extracting objects from the tank. For more information, check the Cleaning Models page. |
 |
Hood |
The upper cover of the printer, made of strong material that protects the resin from curing under the influence of ambient light. The hood of the Envision One has no locking mechanism. You can open or close it manually by rotating the hood on its hinges. |
 |
Material Tray |
The material tray has been designed to work with the upward movement of the build platform. The material tray contains the material and should be treated with care. Clean your material tray with IPA and a paper towel. For more information, check the Installing Envision One Material Tray and Maintenance of Envision One Material Tray pages. |
 |
Material Tray Torque Knobs |
The material tray torque knobs are part of the locking mechanism that secures the material tray in place. See Installing Envision One Material Tray. |
 |
Build Platform |
Also known as Build Plate, Build tray, Printbed, Bed, Build Surface. The surface of the 3D printer on which the 3D printed part is formed. For more information, check the Installing Envision One Build Platform and Cleaning Envision One Build Platform pages. |
 |
Build Platform Torque Knob |
The knob is a part of the locking mechanism that secures the build platform in place. For more information, check the Installing Envision One Build Platform page. |
 |