Time needed: Approximately two minutes
Maintenance frequency: After each print
The printer’s metal casing protects the internal components from damage. To avoid spilling material on the casing, always hold a paper towel under the build platform and the material tray while installing or removing. Once spilled, the material cures to the casing and it is difficult to remove it.
To clean the printer casing:
1. Wipe the spilled material once it touches the printer and before it gets cured.
Caution: If rubbed with too much pressure or for too long, the casing becomes discolored.
2. Remove the majority of the spill with a dry paper towel first. Then lightly spray a second paper towel with IPA and wipe away any residue.
Caution: Do not spray the IPA near or inside the printer.