Load Job Directly from Envision One RP
1. Open Envision One RP.
Important: At least one 3D model should be opened and selected in the software.
2. Press Print.
→ The following window appears.
3. Press the Printer field.
→ The following window appears.
4. Select the printer to send your job to.
5. Press Send to Printer.
→ The job is sent to the selected printer.
Important:
The printers in the network can have the following statuses:
Ready for Print
Printing
Offline
Do not send a job file to a printer with the Offline status.
Load Print Job from Network Folder
Steps to take in Envision One RP:
1. Type Run into the Windows search field or use the <Windows> + <R> hotkey on your computer keyboard.
→ The Run window opens.
2. Enter the IP address of the printer, e. g.: \\10.0.0.24.
→ The Windows file explorer opens, showing the folders on the printer.
3. Open the Job folder.
4. Put the job files in the folder.
→ All the files from the Job folder are now shown in the Job List tab on the Envision One touch screen.