Software Update
To update the Envision One cDLM printer with a new version of the software, you need to check the Software Update tab which provides information about the current version of the software and any new available software versions.
Go to Settings > Printer Settings > Software Update to open the tab.
If the latest software version is installed on the printer, the ChangeLog button is available. It allows checking the detailed information about the current software version.
If there is any software update, the Update button is available.
Important: Do not turn the printer off during the update.
1. Press Update.
→ The following screen appears. It shows information about the changes in the new software version.
2. Press Start.
→ The Experience Improvement window with the message appears asking whether you confirm the data collection to improve the experience with our products.
3. Press OK to allow data collection or Skip to skip this step.
→ The process of printer updating starts.
→ After a successful printer update, the following screen appears.
4. To apply changes, reboot the printer. It reboots automatically in 30 seconds. To reboot the printer manually, press Reboot.
Custom Software Update
There is also an option for users to get a custom version of the Control Software that contains special features. Once that custom Control Software version is ready, users receive an encrypted version number and can install that custom update on the printer.
1. In the Software Update tab, press Change Version.
→ The following screen appears.
Notice: If no custom update is installed yet, the Apply button is grayed out.
2. Press Add Version.
→ The following screen appears.
3. Type the encrypted version number.
4. Select the needed version from the list. Press Apply.
→ The system saves the previously installed Control Software version.
→ The following screen appears.
5. Press Start.
→ The Experience Improvement message appears asking whether you confirm the data collection to improve the experience with our products.
6. Press OK to allow data collection or Skip to skip this step.
→ The printer update starts.
→ After a successful printer update, the following screen appears.
7. To apply changes, reboot the printer. It reboots automatically in 30 seconds. To reboot the printer manually, press Reboot.