What is the Domeless Material Tray?
The domeless material tray is an assembly with a closed circuit of oxygen airflow which minimizes separation forces while printing.
The disposable domeless material tray consists of two plastic frames with a piece of glass and a special film between these frames.
Between the glass and the film, there is a space that is designated for oxygen delivery. It ensures the continuous printing mode and prevents the excessive sticking of parts to the film.
Important: Use a different material tray for each type of material to avoid contamination. If that is not possible, clean the material tray carefully and thoroughly.
How to Install the Domeless Material Tray?
To install the material tray:
1. Unlock the torque knobs on the right and left of the build area.
2. Slide the domeless material tray into the printer, vent holes first, until it is fully seated. Listen for the click.
3. Lock the two clamping handles down.
Important: Tightening the two torque knobs until they are snug is very important. If they are not locked properly, the material will splash inside the printer! Double-check if the torque knobs are tightened securely before starting a build process.