Install Removable Material Tank Xtreme 8K
For Internal and VAR/Sales Partner Use Only - Do Not Share
Internal Use Only - Do Not Share

The technician initially sets up and fills the removable material tank during printer installation.

To install the material tank after cleaning or material changing:

1. Roll the material tank up and push in as far as it can go. Otherwise, the sensor will not detect the material level.
2. On the printer's main screen, press Settings > Tank Lift.

3. Set the step value in the Move By input field.
4. Press Install Tank.
   → The material tank starts moving up.

5. When the material tank stops moving and is at its highest position, connect the heaters connectors and close the front door of the printer.